Jewelry Knock-Offs

I’m a pretty enthusiastic fashion watcher. I enjoy admiring the high fashion lines and noticing how the ideas/concepts trickle down into everyday wear. One thing I have noticed, however, is that sometimes it’s less of a trickle-down and more of a blatant rip-off. Why? Because under existing U.S. copyright law, fashion and accessories just aren’t that well protected.

I decided to compare some similar high-end and low-end jewelry to see just how blatant the copying can be:

Left: Shourouk ($850). Right: Hautelook (about $80).

So this isn’t too blatant. The piece on the right is more inspired by the piece on the left than it is copying it. I’ve been seeing a lot of jewelry featuring rhinestones and brightly colored opaque jewels. It’s a fun trend.

Left: JCrew ($150). Right: Ebay or literally anywhere on the internet ($5-20).

Everyone and their mother was wearing this necklace in the summer of 2012. As you can see, an exact replica can be found pretty much anywhere in any color you can possibly imagine.

Left: Ryan Storer ($630). Right: Baublebar ($32).

So ear cuffs are pretty big these days…I wouldn’t call this a rip-off so much as an inspiration.

Left: Elizabeth Cole ($342). Right: Melody Eshani ($122).

It’s not really clear who copied who from cursory googling, but clearly someone was copied. Relatedly, Elizabeth Cole seems to get copied quite frequently. You can find a (much less attractive) version of its fishbone earrings on Amazon. Forever 21 has also copied Elizabeth Cole more than once, doing an exact replica of its mohawk earrings and its chain earrings in black.

Left: Percossi Papi (about 950 €). Right: Hautelook ($15).

This is so blatant that there’s really nothing to say about it….other than of course I own those knock-offs because I adore Percossi Papi but don’t have a spare thousand dollars lying around.

Left: Lizzie Fortunato ($189). Right: Hautelook (about $20) and Baublebar (about $25).

I actually own the ones on the left! I was super surprised to visit Baublebar one day and find a green version of them staring back at me. Blatant knock-off not even attempting to hide it! ….Well, I love green so I bought them too. So I guess I own the ones on the right as well. No judgment.

Left: Lanvin ($2,295). Right: Hautelook ($15).

This is also pretty blatant. The pricey bird on the left has been seen on Beyoncé and several magazine covers. The one on the right can be seen around my wrist because I totally want a knock-off of something fashion queen Beyoncé has worn.

So this has barely scratched the surface of the many jewelry knock-offs that occur. I just thought it was an interesting subject to consider. Is it fair? Should fashion and jewelry designers be given more protection under the law? Or is this article correct in arguing that it’s good for the industry? Are designers who sell products for thousands of dollars really being cheated by knock-offs that cost $20? Something to consider.

Making Alchemy Earrings Using Lost-Wax Casting

So, I made a pair of huge asymmetrical earrings:

Clearly they go well with bright red lipstick. 

Okay, so I’m not going to go into the whole blow-by-blow of how to make something using lost-wax casting again. If you want to read about that, go here.

I did, however, chronicle making these earrings, so I’m just going to picture dump BECAUSE I CAN!


Initial rough drawing.

I had the idea to make something with alchemy symbols for a while. I was going to somehow do a ring of it, but it was impractical. So here is the fruition of my alchemy idea! I first chose my symbols based on meaning and design appeal. I didn’t want them to be just random symbols with no connection to anything, so I chose the symbols for silver, silver spirit, the torrefaction of silver, and wax. I’m So Meta Even This Acroynm (thank you, XKCD). I had to redesign the alchemy symbol for silver spirit just slightly as you can see by adding a top part for the post/symmetrical reasons. I also added arrows to it so that it would better connect to the other earring and not look totally unrelated.

Final to-scale drawings. 

Straight lines are not my friends. I am terrible at drawing straight lines, as evidenced above. I was also super careful to make sure that the earrings were of the same length. Asymmetrical is one thing, but different lengths is annoying (at least to me).



I used wax sheets (seen above).  Using the master drawings of the earrings, I traced copies and then laid the drawing over the wax sheet. I used a knife to cut the outline of the symbol in wax.

Taken with my phone, hence the weird color.

This was a good deal more difficult than it sounds. I initially tried to use an x-acto knife, but the shape of the blade resulted in strange pressure issues on the sheet of wax and instead of cutting cleanly, it more or less tore it. The curved blade (above) was perfect (although in a moment of idiocy, I cut my thumb open with it…).


Here we see a bunch of paper cut-outs and a reject silver spirit made of wax. Oddly, it was the less-complicated silver spirit symbol that gave me the most trouble.



By some miracle, I managed to cast all the pieces together in one cylinder. As you can see in this picture, I ran out of time (as usual) and didn’t fully clean off the investment from casting. I also hadn’t dipped it in the acid, so that’s why it’s not white. I made the holes for the jump rings (the ring that holds the two pieces together) in wax using the tip of a jewelry blade because it was much easier than drilling into metal.



Here are the pieces detached from the sprues, dipped in acid, but before being filed down.


Here are the sprues. I used a pair of shears to cut some of them off because, as mentioned in another post, it’s less accurate but much faster. I did use a saw for a few of the sprues, though, because they were attached the back of the piece and filing down the nubs left over from the shears would have taken me forevvveeerr.

So after filing down the pieces (which took a while), I polished them up using a polishing machine. Let me just say, you need to have a very firm grasp on your piece while polishing it or it will fly out of your hands. That obviously happened to me…and those moon points and arrows are sharp. Needless to say, I gave myself a few stab marks trying to polish the pieces.

Finding jump rings that fit the small holes I made was a bit tricky but after some trial and error at AC Moore and Michaels, I managed to find some that fit (it also involved using a jewelry saw blade to widen the holes slightly). And in my most controversial decision– it made every jewelry-maker I talked to make a very judgy, disgusted face– I glued (yes, glued) the posts to the back of the earrings. (Shhh, don’t tell.) I basically ran out of time and soldering is not my strong point. In my defense, the posts are holding very well.

And finally, in what was the most distasteful part of the process, I slapped on bright red lipstick and took about 500 selfies of myself wearing the earrings. Taking close ups of my face/skin is definitely not on my Favorite Things list (it’s just after talking about feelings and eating glass), but I don’t have a model available.



THEY ARE SO SHINY. No really, they are super shiny and catch the light when you move your head. And I adore them.


I felt like the shininess didn’t show as well in the picture with a black background.


Mugshot wearing them to prove I have a top-half of a face.

All in all, I really, really, really like them a lot and will actually probably wear them in public. Which is progress, considering I almost never wear anything I make. They are huge and shiny, and that is all I want in anything (but especially earrings).

Lost-Wax Casting: Making a Silver Ring from Hammurabi’s Code

So I made my first cast metal jewelry piece, a silver ring:


I decided it would be fun to document the process and post about how I made it. So let’s begin!


I decided early on to look at antiquities for inspiration. My first thoughts were of Ancient Egyptian jewelry, but I figured I wasn’t technically good enough to pull off something that complex. Here is my brainstorming session:

I apparently thought maybe I was good enough to carve a bird onto a ring. Suuure.

I settled pretty quickly on The Code of Hammurabi. For those unaware, The Code of Hammurabi is an ancient Babylonian legal code written in cuneiform. It is the origin of the phrase an “eye for an eye.” That sounds draconian by modern standards, but the code also features one of the earliest examples of the presumption of innocence. I chose it because a) I’m a lawyer, b) I really love cuneiform, and c) I thought the cuneiform would lend itself really well to be carved. I decided to make the top of the ring flat like a tablet and split it into two columns to mimic the design on the stele.

Source. On view at the Louvre in Paris (which is a whole other issue…)

I picked the cuneiform I was going to copy at random (I do not know/read cuneiform!), but I didn’t just choose random characters. The characters do appear next to each other in the code.

Source. Detail of the cuneiform on the stele.

So next I had to figure out what to do with the band. I didn’t want to overdesign, so I wanted something that was clean but that somehow related to the general theme. I found my answer by looking at sculptures and statues of King Hammurabi.


I went right for his awesome beard. Perfect pattern for the band!


So after designing what you want, you have to make your piece out of wax. This wax piece should look EXACTLY as you want your metal piece to look. So this is what you start with when you’re making a ring:


It’s made of hard wax. It is definitely noooot like a birthday candle (as I had thought maybe it would be). So you must take a blade and cut off an appropriate amount for your ring. You then can use the blade or a wax file to file down your piece into the shape that you want. It’s time consuming and actually quite difficult to get symmetry. Here is my ring all filed down:


For some reason, I didn’t take a picture after this step while still in wax. So I’ll just describe what I did! When I finally had the form I wanted (above), I took a tool similar to an x-acto knife and carved a deep groove in the middle of the flat tablet part of the ring. I then set about carving the cuneiform into the ring, which was less difficult than I thought it would be. I think I held the tool wrong or have a particularly strange hand, because I ended up damaging some nerves in my hand while doing this and have had a numb thumb ever since. (Hooray, strange medical issues unbefitting my age!)

Anyway, I then carved the five parallel lines on the band. The last, and by far most difficult, part was getting the raised baubles on the band. To make those, I had to use a knife tool, heat the knife in fire, and then cut into a softer piece of red wax so that it was liquidy on my blade. I then carefully dripped the liquid wax from my blade onto the ring in the shape of a little bauble. It was very difficult to get even sizes and even more difficult to prevent the liquid wax from wandering into the already-carved grooves on the band.

When I finally had the ring exactly as I wanted, it was time to put the sprues on. What are sprues?

Penny is for size reference. (Note: this is also the wax I used to make the aforementioned baubles.) 

These are cylindrical pieces of soft wax that must be attached to your piece. The bigger and thicker your piece, the more sprues you need to attach. I will explain why in a moment. You attach these by heating your knife tool in the fire and essentially melting the ends onto your piece and allowing them to harden. You can then shore it up by melting some wax and building up the attachment. You do NOT want any seams. You then must attach your piece to the bottom of a hollow metal cylinder.


My least favorite part! In this part, you need to create an investment mix (which is like plaster), that you then pour into the cylinder with your piece in it. The investment hardens around the piece and creates a negative of your piece.


Creating the investment is a very time-sensitive process because it begins to harden within ten minutes of being created. You must mix it, de-bubble it with a funky machine with a bell jar, pour it into the cylinder, and then de-bubble it again in the machine. You also have to be very careful to create the right amount (a lesson I learned the hard way…). The cylinder with your piece is then placed in a kiln the day that you are ready to cast in metal!


Obviously the best part! This type of machine is used to cast in metal:


As you can see, there is an arm in the middle of the machine that you must wind up. You then take your cylinder out of the kiln and place it in the machine. You use a blowtorch to heat up the crucible (which you can see in the picture above) until it is red hot. You add your casting grain metal (in my case, sterling silver) into the now-hot crucible  and continue to heat it with the blowtorch, adding flux as needed, until the metal has melted into liquid. Once the metal has melted into liquid, you release the arm, and it spins around with your cylinder at the end. The centrifugal force forces the liquid metal down the arm of the device and into your cylinder. The wax piece within the mould melts out (perhaps why they call it lost-wax) and is replaced by the metal. This is why the sprues are so important– the liquid metal travels through the channels created in the mould by the sprues. Without the sprues, the metal could not get into the mould and would not be evenly applied throughout the piece.

So once this process is complete, you then take the VERY HOT cylinder and wait for it to cool down a bit. It is then dumped into a pail of water to cool it down further and to dissolve the investment. You have to clean out the mud-like investment and then fish your now-metal piece out of the bucket. You clean off the all the investment from your piece and then put it in a mild acid (…I don’t know why acid. Just go with it…), which turns the piece white. This is how my ring looked after all that:


Notice how it has that stand-like thing attached to it. Those are the sprues! See how it was attached to the bottom of the cylinder? The sprues must always come to a point like that so that they can be easily attached to the bottom of the cylinder (….a concept with which I had trouble…).


So, after all that, there is still more to be done (haha, of course there is)! You must use either a pair of clippers or a saw to get those sprues off. The clippers are much faster but less accurate. Screw accuracy, I totally used the clippers. You then must use a metal file to file down the pieces of sprue you couldn’t get off with the blade/clippers so that it is completely flush with your piece and looks as you intended. This is time consuming and easier said than done.

My ring had a casting issue that caused an imperfection on the inside, which required some soldering. I’m not going to go into that since the teacher fixed it for me while I watched nervously. So after the sprues are totally gone, the piece should be filed and sanded down as desired to get rid of file marks and other imperfections. You can also, as I did, put the piece in a vice and use a very sharp knife to create deeper cuts in the piece if the cuts you made to the wax didn’t go deep enough.

Finally, you polish your piece or add some kind of finish! I opted for simply washing it down with pumice powder to give it a dull gleam. I didn’t think a high polish finish was appropriate for the subject matter. I was thinking of burnishing the piece, so that the cuneiform lettering and the parallels lines on the band would be black, but I’m on the fence with it. Maybe I won’t. I don’t think I’ll ever feel like this piece is finished though! As per my usual, all I can see are all the flaws and things that need fixing. But I think it’s not bad for my first lost wax-casting piece!

Here is more of my finished (maybe?) piece:

Two pictures taken with flash, two taken with natural lighting. 

Meteor Shower Nails

Okay, so apparently all I have time/energy to do in between my panicked bar studying is posts about nails. I’m okay with that.

Save Me” by OPI layered over “Black Cherry Chutney” by OPI. 

Also featured in this picture: constitutional law. I really, really like “Save Me.” It’s hard to get a representative picture of it because it changes colors depending on the lighting and angle of the nail. It is basically comprised of little silver glitter and bigger bars of rainbowy color-changing glitter. It reminds me of meteor showers with the linear flashes of changing color in a dark background dotted with silver.


Far be it from me to criticize, but does NASA take these pictures with a phone camera from 1998? Their pictures always seem so blurry. Come on, NASA! Break into that billion dollar budget and spring for a camera that was made in this century. I kid.

Cake Batter Nails

So I saw this new Sally Hansen Fuzzy Coat nail polish at the store and was intrigued…

Sally Hansen Fuzzy Coat “All Yarned Up” over Essie “Blanc”

I really like how it came out. I don’t think it’s all that textured or fuzzy ( although I’m totally a fan of this textured nail craze), but they’re really fun and feathery. I purposely chose the color scheme to resemble my favorite food group…

Funfetti cake batter is a food group, right?

Shark Slippers

So I went the National Aquarium in Baltimore. And I saw sharks.

Aforementioned shark. In my defense, it was a dark exhibit…

Did you know that cows kill ten times as many people as sharks do? It was written on the aquarium wall, so you know it’s not a lie. I love sharks with their rows of teeth and gill breathing. And then I saw these babies in the gift shop:

Love at first sight. They even have little felt teeth.

Obviously I bought them immediately. I was in the market for slippers anyway, since the floor of my house is a waking nightmare and the Destroyer of Bare Feet (I have stepped on glass before, and I still don’t know where it came from). But the best part is that now I can look like one of my favorite fashion icons:


The inscrutable Tracy Jordan of 30 Rock.


So I have this really weird obsession with galleons. Yeah, those big boats. I’ve noticed them in fashion…


Threadless t-shirt. Kirk’s Folly bracelets. Percossi Papi earrings. Hayden-Harnett scarf.

I think they’re especially awesome if they’re being attacked by giant (sort of fictitious) sea creatures. I blame this drawing I saw when I was a child for this fascination:

“Colossal Octopus” by Pierre Dénys de Montfort 

The thought of sailing on these masted behemoths, unaware what could possibly be beneath you in the dark unknowable waters. Maybe the kraken…I want to believe! 

Graduation Fashion (Again)

So my friend is also graduating (different university), and I’m going to her graduation! I’m quite excited. So excited, in fact, that I think I’ve picked out what I shall wear…


Anthropologie dress. H&M cardigan. H&M flats. Egyptian scarab necklace.

Yep, I like color (and only vaguely matching). I snapped that dress up the second it went on sale. It has birds and pockets. I dare you to find a better dress! It’ll be summer, but I might as well throw a light cardigan into the mix. ….I think Mr. Rogers started my weird obsession with cardigans. Also, I once had a dream about these shoes…a frightening and aggressive barking walrus ate one of them while staring me right in the eye. I’m not sure what that says about me.

Graduation Fashion

I’m graduating from law school soon (eek)! My university holds two events: the graduation itself and a semi-formal gala at a museum. Of course, all that my mind could excitedly comprehend was “AHHH NEW DRESS!!” This is what I plan to wear:


Caché dress. Charm & Chain earrings. Signet class ring. OPI liquid sand Honey Ryder.

I am obsessed with those earrings…I actually have been holding onto them for a while and waiting for a special occasion to wear them. I was specifically looking for a dress that would match the earrings. Man, this dress season was tough. The color selection was awful…it was dressing for either an Easter egg hunt or a funeral. My entire closet is filled with little black dresses; I didn’t want another. And me, a pale strawberry blonde, in pastel is just…a trainwreck. Come on, designers! There were also some neutral color and gold gowns, but they were either prohibitively expensive or would have made me look like a human thumb. And there is a new mullet trend in dresses that I really do not appreciate…I want ALL of my dress to either touch the floor or reach my knees. Mullets just need to be left in the 80s.

I finally found this baby that pretty obviously knocks off Giambattista Valli and Armani gowns.(And I did not pay the price of a used car.) Fun side story: Caché arbitrarily cancelled my order because they “ran out of stock,” so I had to phone a list of stores to see if any of them had the dress in store. Anyway, the signet ring is my university’s class ring. I really love signet rings; there’s something really classic and elegant about them. Finally, gold nail polish to top it all off. I’m really loving the OPI liquid sand collection. I’m not usually a fan of sparkly polish, but I think this has a fun edge to it. I have absolutely no idea what shoes to wear…I’ll probably just throw on a pair of old black heels. Hopefully no one will be looking at my feet.

I was planning to wear this to my graduation ceremony:

The best part is I already own everything!

Nine West dress. Thomas Sabo earrings. Glass necklace. Material Girl heels.

Those are not giant pearls…they’re clear glass baubles. That’s not the exact necklace I have, but it’s close enough. I’m torn though…I was also considering this:


Anthropologie dress. Bauble Bar earrings. Le Chateau bracelet. Nine West espadrilles.

I know the shoes/dress are a little matchy-matchy, but I don’t want to buy anything new. It would probably look best with a pair of nude heels. Alas! The only problem I have this dress is the chest area is a bit small. I have that issue with a lot of dresses actually…the waist will fit but the chest will be too small. It’s probably because my rib cage is approximately the size of a baby whale.

I guess I’ll figure it out!

Smell Like an Egyptian King

So, I have had an immense fascination with ancient Egypt since I was ten years old.

Chillin’ out at Saqqara.

And to me, nothing captures the imagination like the story of King Tut and his incredible tomb. I just read that they discovered preserved perfume among all his goodies and were able to figure out its composition. The ingredients are still available today, so it is possible to recreate the scent. Here it is:

King Tut Perfume Recipe 

  • One quarter cup coconut oil [in place of animal fat that was used]

  • 6 drops of essential oil of spikenard

  • 6 drops of essential oil of frankincense

Source. It supposedly has a complex and musky aroma. It’s interesting how a plant that grows in the Nepal and India region (spikenard) ended up being used as perfume for royalty in Egypt. Anyway, now you can create a batch and walk around pretending to be an ancient Egyptian King (I’m totally planning to do this). Or a mummy. Your call.

Disclaimer: Mummy’s feet, but not King Tut’s feet.